Zimo DCC Sound Kit for locomotive 030TU Chrezo MS450R, 8-pin NEM652

Technical data:

PROTECTIONS:

- Protection against short circuits and overcurrent (integrated circuit breaker in case of overcurrent).

- Integrated temperature detector: motor shutdown above 100°C with light signal sent by the lanterns. Return to normal when the temperature returns to 20°C.

FEATURES:

- Addressing from 1 to 10239

- Automatic analogue detection mode switchable

- 14/28/128 speed steps

- 3 or 28-point speed curve (applicable to analogue)

- Can be operated in km/h or mph

- Adjustable FCEM with load compensation setting

- Motor control in 20 or 40kHz, but also in low frequency from 30 to 159Hz (for older motors)

- Manoeuvring mode, braking mode, configurable inertia

- Multiple unit management with common function management

- Lenz ABC, Marklin and Zimo HLU braking

- Extended function mapping

- Numerous lighting effects (SAL, headlight/spotlight mode, adjustable light intensity, etc.)

- Seuthe-type smoke generator adjustment in steam or diesel mode and integrated fan smoke generator management.

- Krois-type automatic coupling management

- SUSI/servomotor interface.

The MS450 NEM652 (8 pins). 3 watts of audio power, 1.2 amps.

Also equipped with an external switch (for ILS/reed switch, optocoupler or Hall effect) and two unconnected logic outputs (usable for SUSI, servomotors and also for external switches).

The MS450 is capable of delivering 1.2 amps (peak permissible at 2.5 for 20 seconds), including 0.8 for functions. Compatible with DCC, MM, analogue direct current and alternating current.

Accepted sound format: .wav format in 16 bits, 11 and 22kHz. 16 independent channels, 128Mbit memory. The MS450 has 7 pre-downloaded sound projects.

Accepted impedance for speakers: 4 and 8 ohms. Speaker not supplied.

The capacitor simply connects to the opposite blue and grey wires.

The MS450 comes with 4 wired outputs.

All Zimo decoders feature RailCom functionality.

Maximum accepted voltage: 35 volts.

Decoder dimensions: 30x15x4mm

Length with NEM652 connector: 7cm

Warranty: 24 months from date of purchase

Not covered by warranty: Use, conversion or modification of the decoder not specified in the ZIMO user manual (English version available for download or on request).